360° Vehicle Turntables for Villas & Showrooms
2–6 m diameter, up to 6 t load, smooth variable-speed rotation and premium deck finishes—engineered for tight driveways, basements and retail display. Free site visit & quotation across all Emirates.
What Are Car Turntables?
Car turntables rotate a vehicle in place to face the exit, eliminating reversing in tight sites and enabling premium display in showrooms. Systems can be pit-recessed for a flush deck or surface-mounted with low-profile ramps, with variable-speed drives and safety interlocks.
Key Characteristics
Smooth 360° Rotation
Variable-speed control with soft start/stop and precise indexing.
High Load Capacity
2–6 t standard for sedans, SUVs and light trucks (higher on request).
Pit or Surface Mount
Flush recessed deck or low-profile ramp with tapered edges.
Safety & Compliance
Hold-to-run, emergency stop, photoelectric barriers and slip-resistant deck.
Indoor/Outdoor Ready
IP-rated motors/controls, drainage detail and corrosion-resistant finishes.
Common Uses
- Villas and basement parking (tight driveways)
- Auto showrooms and retail displays
- Service centres and photo bays
- Hotels and commercial forecourts
Technical Specifications
Diameter
2.0–6.0 m (custom larger on request).
Load
2–6 tonnes (higher capacities available).
Rotation
360° continuous or indexed; typical 0.5–2 rpm.
Control
Pendant/footswitch, RF remote, keyed console; PLC or inverter control.
Power
3-phase 380/415/440 V, 50 Hz (single-phase options for small diameters).
Deck
Chequer plate, composite, tile-ready or custom branding disks.
Safety
Emergency stop, hold-to-run, photo sensors, slip-resistant deck & bump stops.
Compliance
Designed to applicable machinery safety practices; test certificates provided.
Detailed Specification Table
| Diameter Options | Ø 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0 m (custom on request) |
|---|---|
| Rated Load | 2, 3, 4, 5, 6 t (higher on request) |
| Rotation Speed | ~0.5–2 rpm (adjustable) |
| Drive | Electric geared rim/bull drive; hydraulic optional |
| Mounting | Pit flush (recessed) / surface-mounted with ramps |
| Control | Pendant/footswitch, RF remote, keyed console; PLC/VFD |
| Deck Finish | Steel chequer, composite panels, tile-ready, custom logo |
| Environment | Indoor; outdoor with IP-rated package & drainage |
| Power Supply | 3-phase 380/415/440 V, 50 Hz; single-phase on small units |
| Safety | Emergency stop, hold-to-run, sensors, anti-slip & bump stops |
Final pit/ramp drawings, deck build-up and electrical ratings are confirmed after site survey and approved GA drawings.
Options & Upgrades
Indexed Positions
Stops at preset angles for repeatable vehicle orientation.
Outdoor Pack
Drainage trays, IP-rated enclosures and corrosion-resistant hardware.
Slip Rings
Power/data to centre display plinths on showroom units.
Deck Finishes
Composite, tile-ready, illuminated edge rings and custom branding.
Remote Monitoring
Basic telemetry and service alerts (optional).
Installation Process
Site Survey
Vehicle envelope, driveway geometry, pit/ramp feasibility and drainage.
Design & Approval
GA drawings, pit/ramp details, deck build-up and electrical schematics.
Fabrication
Frame, bearing assembly, drive, controls and finish panels.
Installation
Base ring, centre bearing, drive alignment and deck assembly.
Testing & Commissioning
Load tests, safety checks, rotation tuning and handover.
Training
Operator training and maintenance briefing.
Comprehensive Services
Custom Design
Diameter, load, control and finish tailored to your site.
Installation
Civil interface, MEP coordination and QA protocols.
Maintenance & AMC
Preventive plans, spares and 24/7 breakdown support.
Modernization
Controls, finishes and safety upgrades.
Our Service Process
- Consultation: Vehicle types, access constraints, pit vs surface, finishes.
- Design: GA drawings, drainage, electrical, safety and control logic.
- Execution: Fabrication, installation and commissioning.
- Aftercare: Training, AMC, remote support and periodic audits.
Civil Works & Deliverables
By Client / Builder
- Pit/ramp construction as per GA (if applicable)
- Dedicated power feeder, earthing and lighting
- Drainage and waterproofing (outdoor/basement)
- Floor finish around deck and safety signage
By Gulf Tech Elevators
- GA drawings, pit/ramp and deck build-up details
- Turntable supply, installation, testing & commissioning
- Controls, safety devices and operating instructions
- O&M manuals, training and handover certificates
Request Your Car Turntable Quotation
Free site assessment in Dubai, Abu Dhabi, Sharjah, Ajman, RAK, UAQ, Fujairah and Al Ain. Quick lead times with local UAE manufacturing.
Quick Quote
Service Areas
We serve all UAE Emirates: Dubai, Abu Dhabi, Sharjah, Ajman, Al Ain, Ras Al Khaimah, Umm Al Quwain, and Fujairah.
Project Gallery
Frequently Asked Questions
How long is installation?
After civil readiness, typical installation/commissioning takes a few days—timeline varies with pit, diameter and finish scope.
Can I tile or finish the deck?
Yes—tile-ready or composite topping options are available for showrooms and premium villas.
Is maintenance complex?
Routine checks on bearings, drive, controls and sensors—covered under AMC plans.